- 1535
- 产品价格：面议
- 发货地址：河北衡水枣强县 包装说明：按要求包装
- 产品数量：120303.00 平米产品规格：规格齐全，可定制
- 信息编号：90671017公司编号：14468070
- 徐经理 微信 139328197..
- 进入店铺 在线咨询 QQ咨询 在线询价
嘉定脱硫塔除雾器 二通道除雾器 图片
- 相关产品：
嘉定脱硫塔除雾器
我公司是国内生产除雾器的专业生产商，具有开发，设计，制造除雾器的专业技术人员，我公司生产的除雾器质量可靠，除雾效率高，尤其在处理较细雾粒时，其除雾效率明显**丝网除沫器。
联系热线： Q
联系热线： Q
嘉定脱硫塔除雾器的冲洗水压
除雾器水压一般根据冲洗喷嘴的特征与除雾器之间的距离等因素确定（喷嘴与除雾器之间的距离一般为650-900mm）,冲洗水压低时，冲洗效果差。冲洗水压高则易造成烟气二次带水。同时降低叶片使用寿命。一般情况下，一级除雾器采用两层冲洗；及烟气的正面一层（除雾器对烟气的临界面）向上冲洗，水压为2.5-105pa以内，除雾器的背面一层向下冲洗，水压为1.5-105pa以内.二级除雾器采用一层向上冲洗，水压同一级同样。反面不冲洗，以免造成二次携带。具体的数值需根据工况情况而定。
除雾器水压一般根据冲洗喷嘴的特征与除雾器之间的距离等因素确定（喷嘴与除雾器之间的距离一般为650-900mm）,冲洗水压低时，冲洗效果差。冲洗水压高则易造成烟气二次带水。同时降低叶片使用寿命。一般情况下，一级除雾器采用两层冲洗；及烟气的正面一层（除雾器对烟气的临界面）向上冲洗，水压为2.5-105pa以内，除雾器的背面一层向下冲洗，水压为1.5-105pa以内.二级除雾器采用一层向上冲洗，水压同一级同样。反面不冲洗，以免造成二次携带。具体的数值需根据工况情况而定。
嘉定脱硫塔除雾器冲洗水管选型技术要求
1、除雾器机械要求
1.1除雾器冲洗水管能够满足正常工作的压力要求，保证正常的使用寿命。
1.2除雾器冲洗水管能够满足吸收塔内的使用工况，包括微酸性气体环境，以及含部分颗粒物的烟气。
1.3除雾器冲洗管、喷嘴及构件应能在吸收塔腐蚀、热和磨损浆液条件下防止断裂和腐蚀。管道应易于拆卸和组合。
1.4供方应确保烟气温度在80摄氏度时和短时(10分钟)90摄氏度除雾器冲洗水管不会损坏。
1.5喷嘴设计应与管道连接牢固并易于拆卸。除雾器喷嘴与管道应长期牢固地运行在实际活荷载下。
1.6所有组件的设计，包括除雾器冲洗水母管、支管及和喷嘴的链接构件应有足够的强度，能够承受除雾器重新水泵的压力，并能防止实际运行条件下的振动。
2、除雾器材料要求
2.1除雾器管道、法兰采用玻璃钢FRP，喷嘴采用PP-R材质。
2.2垫圈采用EPDM。
2.3所有法兰采用HG20592标准。
2.4除雾器材料性能完全满足使用工况要求。
1、除雾器机械要求
1.1除雾器冲洗水管能够满足正常工作的压力要求，保证正常的使用寿命。
1.2除雾器冲洗水管能够满足吸收塔内的使用工况，包括微酸性气体环境，以及含部分颗粒物的烟气。
1.3除雾器冲洗管、喷嘴及构件应能在吸收塔腐蚀、热和磨损浆液条件下防止断裂和腐蚀。管道应易于拆卸和组合。
1.4供方应确保烟气温度在80摄氏度时和短时(10分钟)90摄氏度除雾器冲洗水管不会损坏。
1.5喷嘴设计应与管道连接牢固并易于拆卸。除雾器喷嘴与管道应长期牢固地运行在实际活荷载下。
1.6所有组件的设计，包括除雾器冲洗水母管、支管及和喷嘴的链接构件应有足够的强度，能够承受除雾器重新水泵的压力，并能防止实际运行条件下的振动。
2、除雾器材料要求
2.1除雾器管道、法兰采用玻璃钢FRP，喷嘴采用PP-R材质。
2.2垫圈采用EPDM。
2.3所有法兰采用HG20592标准。
2.4除雾器材料性能完全满足使用工况要求。
What is the Mist eliminator security factor？
The safety factor is the basis for the selection and use of equipment. In the future, if there is a need to use or choose the demister in the future, the key is to leave enough time, to compare carefully in the market, to select and purchase performance and quality guarantee, to design a reasonable, regular and high quality mist eliminator.
Safe use and protection will bring fog to us while the safety of the equipment itself can not be ignored. Whether it is the components of the parts, or the structure and design of the basic, we may well know more before we choose and buy, not to buy expensive products, only to choose the kind that can meet the needs of our application.
Excellent performance, greater adaptability to the environment, and so on, are all the mist eliminator can help us. Construction and installation is not a standard. It is also a key factor that can not be ignored for normal use.
To strengthen the maintenance of mist eliminator, the parts that have been seriously damaged and lose their value will be replaced in time. Cooperation with the relatively good after-sales service manufacturers can ensure timely treatment and regular maintenance.
Spot supply： Q
The safety factor is the basis for the selection and use of equipment. In the future, if there is a need to use or choose the demister in the future, the key is to leave enough time, to compare carefully in the market, to select and purchase performance and quality guarantee, to design a reasonable, regular and high quality mist eliminator.
Safe use and protection will bring fog to us while the safety of the equipment itself can not be ignored. Whether it is the components of the parts, or the structure and design of the basic, we may well know more before we choose and buy, not to buy expensive products, only to choose the kind that can meet the needs of our application.
Excellent performance, greater adaptability to the environment, and so on, are all the mist eliminator can help us. Construction and installation is not a standard. It is also a key factor that can not be ignored for normal use.
To strengthen the maintenance of mist eliminator, the parts that have been seriously damaged and lose their value will be replaced in time. Cooperation with the relatively good after-sales service manufacturers can ensure timely treatment and regular maintenance.
Spot supply： Q
联系电话是13932819705, 主要经营模压化粪池 、玻璃钢桥架、除雾器。
单位注册资金单位注册资金人民币 100 - 250 万元。
